CITY-GATES – CGS126

SPECIFICATIONS
CURTAIN – The top and bottom of each section is fitted with an aluminum panel 4″ high. This panel consists of an aluminum extrusion 1/16”thick and composed of modules with a 15° angle between them to facilitate the operation of the closure. The curtain is constructed of vertical rods of 5/16”in diameter. The spacing between the rods is 2-5/8”in a brick pattern. These rods are linked together by flat horizontal bars of 1/8”x 5/8”x 6-5/8”. These bars are spaced vertically every 12”by aluminum sleeves of 1/2”in diameter.

TRACK –  Curtain shall be hung from an overhead track 1-5/16”wide by 1-9/16”high. Track shall be tempered aluminum alloy 6351-T6.

LOCKING –  Lead post shall be equipped with a hook bolt lock with cylinders each side. Lead post shall engage a full height wall jamb. Trailing post shall be self-locking at the top and bottom inside the storage pocket. Free floating intermediate posts shall be located at all curves and at recommended intervals of 10 feet or 5 feet for counter top units. Intermediate posts shall be equipped with self-adjusting spring loaded drop bolts activated from the inside only. Drop bolts shall engage dustproof stainless steel receptacles.

STACKING – Stacking shall not exceed a depth of 1.15”per foot of closure width plus 3”for each post (lead, end or intermediate). Full egress doors add 7”. 

FINISH – Standard clear anodized.